Hidden installation of NAVIN heated towel rail - instructions
How to make a hidden connection for NAVIN electric heated towel rails? We answer!
If you decide to renovate your bathroom , then, of course, you want everything to be perfect. Therefore, having decided which model of NAVIN electric heated towel rail will best suit your personal style, you should also think about hidden installation - so that unnecessary wires do not bring disharmony into the design of your room.
Of course, installing a heated towel rail without a hidden connection is much easier - just measure everything clearly and drill four (usually there are four) holes of the correct diameter in the wall. After this, thanks to the thoughtful fastenings that are always included in the kit, the NAVIN heated towel rail firmly fits into place, as if it had always been there.
But hidden installation of a dryer can also be quite simple if everything is done in accordance with the instructions and safety rules are followed. Also, of course, you will need additional NAVIN branded accessories to ensure a hidden connection.
And today, to the question “How to connect a heated towel rail without a plug, that is, directly to the machine?” To ensure that the power cord is not conspicuous, NAVIN offers several options:
- For example, you can use our hidden connection kits. Made from high-quality and durable plastic, they visually look like an integral element of the dryer design. Below we provide an illustrated sequence of installing a heated towel rail using such kits.
- Also, if you wish, you can use a special box for hidden connection of your NAVIN heated towel rail. These boxes are made of stainless steel and come in several color modifications. Later in this article you will also learn how to connect a heated towel rail through such a box.
Installation sequence for an electric heated towel rail using concealed connection kits
- Cut the power cord of the NAVIN heated towel rail, leaving about 10 cm (5-6 turns).
- Connect the inner and outer parts of the hidden connection kit, taking into account the desired orientation (depending on the cross-sectional shape of the vertical dryer posts - round or square). Screw the kit to the desired location on the wall by measuring and pre-drilling two holes of the required diameter for installing the dowels (supplied).
- Remove the insulation from the wires (expose about 2 cm). Connect the connection point wires to the dryer wires through the terminal block (supplied).
- Tighten the cord inside the flush connection kit. Install the NAVIN heated towel rail so that the set touches the stand (manifold), masking the cable connection.
Attention! Before installing the heated towel rail wiring kit, turn off the power supply to the room.
We hope this article helped you answer the question “How to conceal a heated towel rail?” If you need additional advice on this or any other issue, our specialists will be happy to advise you. Let your NAVIN heated towel rail not only work properly for many years, but also be a real decoration for your interior! ♥